查看(SKU:RB-01C016)Arduino 網絡擴展板的源代碼
←
(SKU:RB-01C016)Arduino 網絡擴展板
跳轉至:
導航
、
搜索
因為以下原因,你沒有權限編輯本頁:
您剛才請求的操作只有這個用戶組中的用戶才能使用:
用戶
您可以查看并復制此頁面的源代碼:
[[文件:RB-01C016.jpg|500px|縮略圖|右]] ==產品概述== 以W5100為核心的Arduino Ethernet網絡擴展模塊,可以使Arduino成為簡單的Web服務器或者通過網絡控制讀寫Arduino的數字和模擬接口等網絡應用??芍苯邮褂肐DE中的Ethernet庫文件便可實現一個簡單Web服務器。同時該版本的支持mini SD卡(TF卡)讀寫,功能強悍,不容錯過!該擴展板采用了可堆疊的設計,可直接插到Arduino上,同時我們的其他擴展板也可以插上去。 ==規格參數== ==使用方法== 1.將網絡擴展板與UNO插接在一起,確保引腳連接正常。<br/> [[文件:wangluokuozhan1.jpg|500px|有框|居中]] 2.如圖所示連接UNO和PC機,下載代碼到UNO控制器中<br/> [[文件:wangluokuozhan2.jpg|500px|有框|居中]] <pre style='color:blue'>/* Web Server A simple web server that shows the value of the analog input pins. using an Arduino Wiznet Ethernet shield. Circuit: * Ethernet shield attached to pins 10, 11, 12, 13 * Analog inputs attached to pins A0 through A5 (optional) created 18 Dec 2009 by David A. Mellis modified 9 Apr 2012 by Tom Igoe */ #include <SPI.h> #include <Ethernet.h> // Enter a MAC address and IP address for your controller below. // The IP address will be dependent on your local network: byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; IPAddress ip(192,168,1,177); // Initialize the Ethernet server library // with the IP address and port you want to use // (port 80 is default for HTTP): EthernetServer server(80); void setup() { // Open serial communications and wait for port to open: Serial.begin(9600); while (!Serial) { ; // wait for serial port to connect. Needed for Leonardo only } // start the Ethernet connection and the server: Ethernet.begin(mac, ip); server.begin(); Serial.print("server is at "); Serial.println(Ethernet.localIP()); } void loop() { // listen for incoming clients EthernetClient client = server.available(); if (client) { Serial.println("new client"); // an http request ends with a blank line boolean currentLineIsBlank = true; while (client.connected()) { if (client.available()) { char c = client.read(); Serial.write(c); // if you've gotten to the end of the line (received a newline // character) and the line is blank, the http request has ended, // so you can send a reply if (c == '\n' && currentLineIsBlank) { // send a standard http response header client.println("HTTP/1.1 200 OK"); client.println("Content-Type: text/html"); client.println("Connection: close"); // the connection will be closed after completion of the response client.println("Refresh: 5"); // refresh the page automatically every 5 sec client.println(); client.println("<!DOCTYPE HTML>"); client.println("<html>"); // output the value of each analog input pin for (int analogChannel = 0; analogChannel < 6; analogChannel++) { int sensorReading = analogRead(analogChannel); client.print("analog input "); client.print(analogChannel); client.print(" is "); client.print(sensorReading); client.println("<br />"); } client.println("</html>"); break; } if (c == '\n') { // you're starting a new line currentLineIsBlank = true; } else if (c != '\r') { // you've gotten a character on the current line currentLineIsBlank = false; } } } // give the web browser time to receive the data delay(1); // close the connection: client.stop(); Serial.println("client disonnected"); } } </pre> 3.將網絡擴展板使用網線與電腦連接<br/> [[文件:wangluokuozhan3.jpg|500px|有框|居中]] 4.設置本地計算機的網絡<br/> [[文件:wangluokuozhan4.jpg|400px|有框|居中]] 5.設置后W5100網絡擴展板板載的4個LED會亮起,如果沒有請按下復位按鈕<br/> [[文件:wangluokuozhan5.jpg|400px|有框|居中]] 6.現在讀出W5100網絡擴展板的IP地址<br/> [[文件:wangluokuozhan6.jpg|700px|有框|居中]] 7.通過電腦可以訪問W5100網絡擴展板<br/> [[文件:wangluokuozhan7.jpg|700px|有框|居中]] ==應用例程== Arduino Ethernet網絡擴展模塊與Arduino UNO 控制器 [[文件:RB-01C0161.jpg|500px|縮略圖|居中]] Arduino Ethernet網絡擴展模塊與Arduino MEGA2560控制器 [[文件:RB-01C0163.jpg|500px|縮略圖|居中]] ==產品相關推薦== 論壇地址:[http://www.makerspace.cn/portal.php 奧松機器人技術論壇]<br/> 購買地址:[http://gharee.com/goods-219.html Arduino 網絡擴展板]
返回
(SKU:RB-01C016)Arduino 網絡擴展板
。
來自“
http://gharee.com/wiki/index.php/(SKU:RB-01C016)Arduino_網絡擴展板
”
導航菜單
個人工具
登錄
名字空間
頁面
討論
變換
查看
閱讀
查看源代碼
查看歷史
操作
搜索
導航
首頁
社區專頁
新聞動態
最近更改
隨機頁面
工具箱
鏈入頁面
相關更改
特殊頁面
頁面信息
隱私政策
關于ALSROBOT WiKi
免責聲明